Specifications and characteristics of TYPE-C waterproof female seat

TYPE-C waterproof female socket is the next generation specification of Mini-USB, which was formulated by USB standardization organization USBimplementerForum （USB-IF） on January 4th, 2007. TYPE-C waterproof base supports OTG, which is 5pin like Mini-USB.

● TYPE-C（6P-12P-14P-16P-20P-24P） mother seat on the board.

● The sinking plate （0.8-0.9-1.0-1.1-1.6-1.2-2.35-2.2） Type-C （6p-12p-14p-16p-20p-24p） female seat.

● Vertical SMT（6P-24P）TYPE-C socket

● sink SMT patch TYPE-C male seat

● short body TYPE-C mother block

● The expansibility is good, and the type-c motherboard is suitable for all kinds of USB devices;

● The TYPE-C bus can pass the current of 3A, and the specifications attached to the Type-C bus can provide 100w power, which can realize the function of fast charging. Most of the connectors supporting fast charging in the market are data lines with type-c interface.

● The standard standard cable equipped with Type-C connector can pass 3A current, and at the same time, it also supports "USB PD" beyond the existing USB power supply capacity, which can provide 100W more power.

● The Type C female socket supports the "forward and backward insertion" function that can be inserted from both sides, and can withstand 10,000 repeated insertions;

● The greater data transmission speed of the Type C motherboard reaches 10Gbit/ s, which is also the standard of USB 3.1;

● Splint 0.8-1.0-1.2-1.6（12P-24P）TYPE-C female seat

● Vertical SMD SMT（6P-24P）TYPE-C block

● SMT patch on board TYPE-C male seat

● The size of the socket end of Type-C waterproof female socket is about 8.3mm×2.5mm slim design;

● The transmission speed is fast, and the data transmission speed can reach 10Gbit/ s;

● The size of Type-C female seat is small;

● Good usability. TYPE-C mother pedestal type-c mother pedestal supports both front and back insertions, and can withstand 10,000 repeated insertions;

The pin spacing of TYPE-C waterproof base is reduced, which may lead to a relatively high probability of short circuit. Because the pin spacing of TypeC connector is only smaller than that of general TypeA connector. Therefore, when the pin spacing is reduced, under the condition of high current, the TYPE-C waterproof socket will not be compatible with excessive current, and it may be directly burned or damaged. There will be some failures in the use of TYPE-C waterproof female seat, which may be caused by some factors. First of all, it is likely to be the high-power transmission and compact line connection of the typec bus. For the typec bus -USB2.0, it cannot be used as the replacement of the typec bus -3.0. Otherwise, once it is replaced, it will greatly increase the risk of failure in the use of typec mother seat to a certain extent.